SeaLand Magnum Opus 3000 Series Toilets - Manual (Page 7)

7
FLUSH MECHANISM COMPONENTS
Base Assembly
Cable
BASE ASSEMBLY COMPONENTS
(under china toilet)
Water Valve Flush Ball
Closed Limit
Switch
Motor
Drive Arm
Rotor Arm
Flush Valve
Motor
Flexible Water Supply Hose
Open Limit
Switch
Mode
Switch Water
Level Switch
Power
Cable
CONTROL
MODULE
Input
for
Flush
Handle
Cable
Input for
Base Assembly Cable
1. To access
base assembly
components,
remove
decorative
screw caps
and unscrew
four bolts that
hold china
toilet to floor. 2. Remove access cover.
Lift up control module.
Disconnect power cable
from control module.
Do not disconnect flush
handle cable or base
assembly cable. 3. Lift china toilet
straight up and set
it down close to
front of floor flange/
adapter assembly.
Turn off water to
toilet and discon-
nect flexible water
line at rear of base
assembly. The
toilet is completely
disconnected.
Flush
Switch
Flush
Handle
Cable
FLUSH HANDLE COMPONENTS
(under Access Cover)
Flush
Handle