SeaLand Floor Flange Seal Kit User Manual
Floor flange seal kit installation instructions
Advertising
1. Remove old floor flange seal and discard.
2. Remove old toilet mounting bolts and discard.
3. Insert the four T-bolts into slots of floor
flange.
4. Spread small amount of liquid dishwashing
soap on top of floor flange.
5. Set the floor flange seal over the T-bolts, and
force the T-bolts up through the round
grommets in the floor flange.
6. Set toilet base in place. Place washers over
protruding ends of T-bolts. Fasten nuts onto
T-bolts and tighten securely.
Floor Flange Seal Kit
Installation Instructions
600344402
Dometic Corporation
13128 State Rt 226
PO Box 38
Big Prairie, OH 44611
1-800-321-9886
© Dometic Corporation
Advertising