Crestron electronic QM-FTCC - Manual (Page 33)

Crestron QM-FTCC QuickMedia™ FlipTop Computer Center
Visual Representation of Gating Level, Clipping Level, Attack Time and Decay Time
Clipping Level
Gating Level
Attack Time
Mic Off
TIME
SIGNAL LEVEL
Decay Time
Mic On
SIGNAL LEVEL
TIME
MICROPHONE
INPUT
SIGNAL
QM
OUTPUT
SIGNAL
Mic On
Attack Time Decay Time
Mic Off
Gating Level Reached
Gating Level
Reached
Setting Microphone Gain
The QM-FTCC provides variable gain for the microphone inputs. The following
procedure is used to set the optimal gain for a microphone input.
Use the Realtime Mode in SystemBuilder to control phantom power, gain and gate
settings and to monitor the gate, normal and clip level indicators. For information on
using SystemBuilder software, refer to the extensive help information provided with
the software.
NOTE: The input gain is independent of the system’s output volume level.
Operations & Installation Guide – DOC. 6313B QuickMedia™ FlipTop Computer Center: QM-FTCC • 29