Seville Classics UHD16241 - Manual (Page 11)

Step 11: Install (#23) Magnet.
Step 12: Install (#6-A, #7-A) Left and Right Doors.
Note:
Step 13: Install (#5) Middle Shelves.
Note: 150 lbs. maximum loading for each shelf.
Place (#23) Magnet onto (#3) Top Panel and (#4)
Bottom Panel facing the front, use 4pcs (#41) Screw
F to tighten.
1). Attach (#6-A) Left Door to (#1-A) Left Side Panel,
use 11pcs (#41) Screw F to tighten.
Note: The screw holes on the door hinge have
tolerance, enabling the door to be adjusted and
centered in the door frame. Place top, middle and
bottom Screws first. Don't tighten screws
completely - this may save time by avoiding having
to make slight adjustments for leveling door panels
later.
2). Install (#7-A) Right Door the same way.
The leveling feet may need to be adjusted after this
step to help align door panels in the door frame.
1). Decide the height for the each Middle Shelf (#5).
Place 1pc of (#34) Hook into the hook slot where
each corner of shelf should be placed. Make sure
the hooks supporting each shelf are at same height.
Note: All (#5) Middle Shelves need a hook at each
corner to support it.
2). Place each (#5) Middle Shelf into cabinet and
push down onto (#34) Hooks.
Storage Cabinet (Model No. 16241)
ASSEMBLY INSTRUCTIONS
(pg 10 of 11)