Receiving and inspection – Shellab SCO12WE-2 User Manual
Page 4
3
RECEIVING AND INSPECTION
IMPORTANT: READ THIS INSTRUCTION MANUAL IMMEDIATELY.
Your satisfaction and safety require a complete understanding of this unit, including its proper function and
operational characteristics. Be sure operators are given adequate training before attempting to put the unit in
service. NOTE: This equipment must be used only for its intended application; any alterations or
modifications will void your warranty.
1.1
Inspection: The carrier, when accepting shipment, also accepts responsibility for safe delivery and
is liable for loss or damage claims. On delivery, inspect for visible exterior damage, note and
describe on the freight bill any damage found and enter your claim on the form supplied by the
carrier.
1.2
Inspect for concealed loss or damage on the unit itself, both interior and exterior. If any, the carrier
will arrange for official inspection to substantiate your claim. Save the shipping crate until you are
sure the unit has been delivered in good condition.
1.3
Return Shipment: If for any reason you must return the unit, contact your customer service
representative for authorization and supply nameplate data. Please see the manual cover for
information on where to contact customer service.
1.4
Accessories: Make sure all of the equipment indicated on the packing slip is included with the unit.
Carefully check all packaging before discarding. An accessory package is included with each unit.
The unit is equipped with 3 shelves, 4 shelf standards and 1 humidity pan per chamber, 4 leveling
feet and 1 supply hose kit. Units are supplied with a power cord.
Section
1