Bath cover assembly – Shellab SWB30-2 User Manual
Page 11
Advertising
6
Microprocessor Control Water Baths
11
Bath Cover Assembly
To assemble the bath cover, perform the following steps:
1. Insert 2 (Item 4) self-tapping screws through the respective cover holes and into the holes in the
handle (Item 2), leaving the first self-tapping screw loose to assure proper alignment. See Figure 3.
Firmly fasten both screws into place. Do not over-tighten.
Figure 3. Bath Cover Assembly
Handle Part#3800609
Advertising
This manual is related to the following products: