SIG SAUER BLASER R93 - Manual (Page 6)

6
english
1. Assembling, taking down
1.1 Assembling
- Remove the large allen key (SW 4)
from its pocket in the shipping carton.
With the barrel screw studs pointing
down, insert the barrel into the recei-
ver (fig. 1).
fig. 1 fig. 2
fig. 3
- Then, insert the allen key into the holes
on the bottom of the fore-end and
tighten the two allen screws equally
locking the barrel and receiver together
(fig. 2). Do not use any extension tools
on the allen key to tighten screws.
Good hand tightness is sufficient.
- Drop the magazine into the receiver
with the magazine lips upwards
(fig. 3).
R93-Manual-english 08.01.2001 16:22 Uhr Seite 6