SIG SAUER SHR 970 - Manual (Page 7)

7 6
General Description
Manufactured by advanced, state-of-the-art production processes, the SIGARMS ™
SHR 970 rifle is a modern, short throw, bolt-action rifle, with an internal extrac-
tor and ejector. The modern take-down design allows for quick and precise bar-
rel replacement and enables the user to perform routine maintenance
without special tools.
Principle Features
SIGARMS SHR 970
• Modern take-down design.
• Interchangeable barrel(s).
• 3 Position safety mechanism.
• 65° Short throw bolt.
• Bolt locks directly to the barrel.
Ammunition
CALIFORNIA PROPOSITION 65 WARNING
Discharging firearms in poorly ventilated areas, cleaning firearms, or
handling ammunition may result in exposure to lead and other substances
known to cause birth defects, reproductive harm, and other serious physical
injury. Have adequate ventilation at all times. Wash hands thoroughly
after exposure.
Your SIGARMS SHR 970 rifle will function safely and effectively with a wide
variety of commercial, factory-loaded ammunition of the correct caliber.
Follow the instructions below to assure trouble-free performance and prevent
ammunition related problems.
1. Use only ammunition of the correct caliber for which your rifle is chambered.
The correct caliber is permanently stamped on the left side of the barrel.
WARNING
Using the WRONG ammunition could destroy your rifle and
cause serious personal injury or death. If a bullet is in the bore,
do not attempt to shoot it out by using another cartridge. This
can generate excessive pressure, damage the firearm and cause
serious personal injury.
2. SIGARMS ™ recommends the use of clean, commercial factory-loaded ammu-
nition. Always use ammunition that complies with the performance standards
established by the Sporting Arms and Ammunition Manufacturers’ Institute,
Inc. of the United States (SAAMI).
The use of ammunition which is not of standard dimension, proper caliber
or which has not been loaded in accordance with SAAMI specifications can
cause serious personal injury and can damage your firearm.
CAUTION: For your safety, the safety of others and to avoid damage to the
firearm, beware of barrel obstructions. An obstruction, such as mud, snow,
dirt or other foreign object, can increase pressure and cause damage to your
firearm and cause injury to you and to others. Before checking the barrel for
an obstruction, make sure the safety mechanism is in the center (load/unload)
position. Open the action and remove the bolt, making sure the firearm is
unloaded. After assuring yourself that the firearm is completely empty, look
through the chamber (do not look down the muzzle). If an obstruction is detect-
ed, no matter how small it may be, clean the barrel as described in the
“Cleaning and Lubrication” section of this manual on page 15.
3. Always inspect your ammunition before use to be certain all cartridges are
the correct caliber.
4. Keep your cartridges free of oil. Wipe the chamber clean of any oil or preser-
vative before you shoot. Oil in the chamber creates excessive pressures.
5. Before loading any live ammunition make sure that you are familiar with the
rifle and this instruction manual completely.
• High-density synthetic or walnut stock.
• Hammer-forged barrel and chamber.
• Detachable steel box magazine.
• Unique bedding block system.
• Hard carry case with each rifle.
Ammunition
(continued)