SilentKnight 5499 9A Distributed Power Module User Manual
Model 5499
Advertising
Table of contents
Document Outline
- Contents
- Section 1 Introduction 1
- Section 2 UL Requirements 2
- Section 3 System Overview 3
- Section 4 Installation 7
- 4.1 Mounting 7
- 4.1.1 Preventing Water Damage 7
- 4.2 Wire Routing 8
- 4.3 Current Requirements (Standby and Alarm) 9
- 4.3.1 Current Drawn From Host Panel 9
- 4.3.2 Current Drawn from Battery 9
- 4.4 Connecting the 5499 to a Control Panel 11
- 4.4.1 Common Trouble Relay 12
- 4.5 Notification Appliance Wiring 13
- 4.5.1 Class A Supervised Wiring 13
- 4.5.2 Class B Supervised Wiring 14
- 4.6 Ground Fault Detection Enable/Disable Jumper 15
- 4.7 Battery Connection 16
- 4.8 DIP Switch Settings 17
- 4.8.1 Selecting the Standard Input/Output Configurations 18
- 4.8.2 Selecting Synchronized Output Configurations 20
- 4.8.3 Setting the Loss of AC Delay 22
- 4.8.4 Setting the Auxiliary Output 22
- Section 5 Sample Applications 23
- Section 6 Troubleshooting 27
- Appendix A UL Listed Notification Appliances 33
- Section 1 Introduction
- Section 2 UL Requirements
- Section 3 System Overview
- Section 4 Installation
- 4.1 Mounting
- 4.2 Wire Routing
- 4.3 Current Requirements (Standby and Alarm)
- 4.4 Connecting the 5499 to a Control Panel
- 4.5 Notification Appliance Wiring
- 4.6 Ground Fault Detection Enable/Disable Jumper
- 4.7 Battery Connection
- 4.8 DIP Switch Settings
- Section 5 Sample Applications
- Section 6 Troubleshooting
- Appendix A UL Listed Notification Appliances
- Silent Knight Fire Product Warranty and Return Policy
- Manufacturer Warranties and Limitation of Liability