Handling compact discs, Cassette deck operation, Inserting a cd – Califone 1776 User Manual

Page 6: Cleaning disc

Advertising
background image

5

Vi s i t u s o n l i n e a t c a l i fo n e. co m

Vi s i t u s o n l i n e a t c a l i fo n e. co m

Handling Compact Discs

Inserting a CD

This unit is designed to play only compact discs bearing the
identification logo below. Other discs may not conform to
the CD standard and may not play properly.

• Dirty, scratched or warped disc may cause skipping or noise.
• Handle the disc only by the edges. To keep clean, do not
touch its surface.
• Discs should be stored in their cases after use to avoid
serious scratches.
• Do not expose disc to direct sunlight, high humidity, high
temperatures or dust etc. Prolonged exposure to extreme
temperatures can warp the disc.
• Do not stick or write anything on either side of disc. Sharp
writing instruments, or the inks used in some felt tip pens,
may damage its surface.

Cleaning Disc

• Finger prints should be carefully wiped from the surface of
disc with a soft cloth. Unlike conventional records, compact discs
have no grooves to collect dust and microscopic debris, so gently
wiping them with a soft cloth should remove most particles.
Wipe in a straight motion from the center to the edge.
• Never use thinner, benzine, record cleaner or anti-static spray
on a compact disc as they can damage its plastic surface.

Cassette Deck Operation

INSERT WITH

THE LABEL

FACING UP.

PRESS THE CLAWS

AT THE CENTER OF

THE DISC CASE.

PRESS THE

DISC GENTLY

TO INSERT IT.

LIFT OUT WITHOUT

TOUCHING THE

RECORDED SURFACE.

INCORRECT

CORRECT

FROM THE CENTER TO THE EDGE

INCORRECT

INSERT WITH

THE LABEL

FACING UP.

PRESS THE CLAWS

AT THE CENTER OF

THE DISC CASE.

PRESS THE

DISC GENTLY

TO INSERT IT.

LIFT OUT WITHOUT

TOUCHING THE

RECORDED SURFACE.

INCORRECT

CORRECT

FROM THE CENTER TO THE EDGE

INCORRECT

INSERT WITH

THE LABEL

FACING UP.

PRESS THE CLAWS

AT THE CENTER OF

THE DISC CASE.

PRESS THE

DISC GENTLY

TO INSERT IT.

LIFT OUT WITHOUT

TOUCHING THE

RECORDED SURFACE.

INCORRECT

CORRECT

FROM THE CENTER TO THE EDGE

INCORRECT

Advertising