SilentKnight FFT-FPJ - Manual

P/N 54418 Rev A
ECN 11-0003
FFT-FPJ Installation
Instructions
The following instructions are a quick
reference guide, for more information refer
to the IFP-FFT installation manual PN
54708 or the SK-FFT installation manual PN
54711.
FFT-FPJ Remote Phone Jack
FFT-RHS Fire Fighter’s Remote Hand Set
Mounting
The FFT-FPJ Fire Fighter’s Phone Jack
mounts to a single-gang electrical box
(4 x 2-1/8 x 2-1/2), or when the addressable
mini-monitor module is installed with it, a
deep single-gang electrical box
(4" x 2-1/8” x 3-1/4”).
All circuits are power-limited and
supervised.
Figure 1: FFT to FFT-FPJ connection
Figure 2: EOL Example
FFT-FPJ Operation
To make a call to the main panel, insert the
remote handset plug into the FFT-FPJ phone
jack.
When call is complete, remove the remote
handset from the jack
Contact EOL is set to connected
See Figure 2 for EOL Example