Powerboost1 information – SilentKnight IPGSM-4G User Manual
Page 11
Advertising
IPGSM-4G Commercial Fire Communicator – Installation and Setup Guide
– 9 –
PowerBoost1 Information
LED Indicator
STATUS
AC (green)
AC power available.
ACTIVE (green)
Cyclical flashing – normal communications.
Repetition of 3 flashes – loss of communications.
LOW BATT (yellow)
Missing or low battery.
TROUBLE (yellow)
One or more trouble conditions exist, such as; overload, output supervi-
sion, ground fault, or charger failure.
Notes:
•
If AC power is lost and the battery voltage falls below 10v, the PowerBoost1 output voltage will be turned
off. The output power is turned back on when AC power is restored.
•
You must use the DIP switch settings shown below.
Advertising