Chicago Electric HARBOR FREIGHT TOOLS 98544 User Manual

Page 5

Advertising
background image

SKU 98544

For technical questions, please call 1-800-444-3353.

Page 5

Specific Drill/Driver Safety

Warnings

maintain a safe working environ-

1.

ment. Keep the work area well lit.

Make sure there is adequate sur-

rounding workspace. Always keep

the work area free of obstructions,

grease, oil, trash, and other debris.

Do not use the Cordless Drill/Driver

in areas near flammable chemicals,

dusts, and vapors. Do not use this

product in a damp or wet location.
maintain labels and nameplates on

2.

the Cordless Drill/Driver. These

carry important information. If un-

readable or missing, contact Harbor

Freight Tools for a replacement.
When using the Cordless Drill/

3.

Driver, always maintain a firm grip

on the tool with both hands.
Hold the tool by its insulated grip-

4.

ping surfaces when performing an

operation where the Cordless Drill/

Driver may contact hidden wiring.

Contact with a “live” wire will make

exposed metal parts of the Cordless

Drill/Driver “live” and shock the op-

erator.
Do not use the Cordless Drill/

5.

Driver or Charger if it has been

dropped, damaged, left outdoors,

or immersed in liquid.
To avoid electric shock, do not

6.

pull or carry the Charger by its

power Cord or pull the power Cord

around sharp corners or edges.

Do not unplug the Charger by pulling

on the Power Cord. Keep the Power

Cord away from heated surfaces.

To avoid electrical shock, do not

7.

handle the Charger or the Cordless

Drill/Driver with wet hands.
Keep the Handles of the Cordless

8.

Drill/Driver dry, clean, and free

from oil or grease.
avoid unintentional starting.

9.

Make

sure you are prepared to begin work

before turning on the Cordless Drill/

Driver.
never leave the Charger unat-

10.

tended when it is plugged into an

electrical outlet. Unplug the Char-

ger from its electrical outlet before

leaving. Place the Charger on a solid

surface such as a garage floor; never

place on anything flammable.
pROpER BaTTERY paCK CaRE:

11.

Battery pack (44) leakage may oc-

cur under extreme usage or tem-

perature conditions. If Battery Pack

fluid comes in contact with skin, rinse

with lemon juice and vinegar then

wash with soap and water. If the fluid

comes into contact with the eyes,

flush with water for several minutes

and contact a doctor immediately.

Never burn the Battery Pack, as it

can explode in a fire. Do not charge

the Cordless Drill/Driver with a leak-

ing Battery Pack. Contact local solid

waste authorities for instructions on

correct disposal or recycling of the

Battery Pack.
WaRnIng! people with pace-

12.

makers should consult their

physician(s) before using this

product. Operation of electrical

equipment in close proximity to a

heart pacemaker could cause inter-

ference or failure of the pacemaker.

Advertising