Accessing the receiver, User mode password – SilentKnight VisorAlarm Plus 2U Operating Instructions User Manual
Page 13
VisorALARM PLUS 2U Operating
III - 6
Doc.DM375-I
Ver.1.0
1. Accessing the receiver
Access to receiver keypad functions is password protected.
If you are not logged into the VisorALARM PLUS 2U receiver, both when the ACK key is pressed
twice or when the OK key is pressed to gain access to the receiver menus, a password is needed. The
LCD shows a prompt as in the figure:
The numeric keys must be used to introduce a valid numeric password for the system. There are three
privilege levels with different passwords to access the receiver. The default receiver passwords for the
three privilege levels are:
User/Privilege
Factory Password
Manager
24680
Supervisor
13579
Operator
11111
All the users (“Manager”, “Supervisor” and “Operator”) can monitor the receiver and acknowledge
signal one by one.
User “Manager” and “Supervisor” have the additional permission to acknowledge all the signals
simultaneously.
USER MODE
Password: *****_