Slant/Fin CHS-FS-40 - Manual

CHS FLOOR STAND (P/N 818-171 & 818-169)
INSTALLATION INSTRUCTIONS
Version Date: 2014-09-03
Slant Fin Corp.
100 Forest Drive
Greenvale, NY
11548 USA
Technical Assistance:
(516) 484-2600
Fax: (516) 484-5921
www.slantfin.com
CHS-FS-40
APPLICABLE MODELS:
P/N 818-169 – Floor Stand CHS300-399

Intended for use with CHS300-399 boiler models
P/N 818-171 – Floor Stand CHS85-250

Intended for use with CHS85-250 boiler models

DO NOT use with CHS300-399 boiler models
Floor Stand P/N 818-171-000 is not to be used with CHS300-399 boiler models.
Failure to comply may lead to serious injury or property damage.
Introduction
The CHS Floor Stands are intended for use with Slant/Fin boiler models CHS-85 to CHS-399; they are NOT
intended for use with other boiler models. It is the installer’s responsibility to ensure the floor stand is
assembled and the boiler is mounted in accordance with these instructions. Check Floor Stand kit contents to
ensure all components are included, prior to commencing assembly. Contact Slant/Fin if assistance is
required.
Overall Assembled Dimensions
Dimensions
1
Model A C D
CHS85-110 63-1/2 18-1/4 25-3/4
CHS155-250 63 18-1/4 25-3/4
CHS300-399 63-1/4 18-1/4 23-1/8
Notes:
1
All dimensions are in inches.
2
Dimension B is dictated by the width of the
stand;

P/N 818-169 CHS300-399 = 26”

P/N 818-171 CHS85-250 = 20”
FRONT VIEW SIDE VIEW