Slant/Fin DHWG - Manual

INSTALLATION INSTRUCTIONS
Contents Page
Components Included . . . . . . . . . . . . . . . . . . . . . . . . . 2
Dimensions & Specifications . . . . . . . . . . . . . . . . . . . . 3
Wall Mounting Instructions. . . . . . . . . . . . . . . . . . . . . . 3
Water Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Electrical Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Warning - Hot Water Can SCald!
A tempering valve is recommended to be installed on
the hot water outlet to all fixtures where direct user con-
tact can be made with the water supplied by the DHW
system, to prevent any possible scalding conditions. See
Figure 3 for the appropriate installation method of this
device (not supplied with the DHWG system).
Printed in U.S.A. 111 PUBLICATION DHWG-40
Part No. 67 5025
Heating Contractor
Address
Phone Number
Model Number
Serial Number
Installation Date
DHWG designed for use with Slant/Fin Bobcat and Lynx series
and other similar boilers with DHW priority control capabilities.
D O M E S T I C H O T W A T E R G E N E R A T O R