SmarTek Systems HiWayVU Startup Operation - Manual (Page 4)

HiWayVU Startup and Parameter Selection
Start HiWayVU like any other Windows application
from the Start menu or the Desktop. The HiWayVU
version 10.1.1 splash window appears and after a
couple of seconds a windows File Open dialog
window appears. Navigate to the folder which holds
the HiWayVU project files and folders. Click on the
parameter file (.inp) to select it and then click Open.
Note: The HiWayVU_Paths.inp is not a parameter file.
After HiWayVU has been run for the first time and
site parameters have been set, the project folder
will contain a subfolder for each sensor site in
HiWayVU (named using each site number, i.e.
nytb0532). Each of these subfolders is used to
contain any uploaded SAS-1 archive files (.ahx) and
associated Header files (.hdr) used separately for
archive decoding and conversion. The project
folder may also contain the Working, Download,
and ThirdParty subfolders (default names)
depending on setup selections by the previous user.
(Folder path selection will be described in the
following pages).