Solvline Eddy User Manual
Page 16
########################################################
########################################################
########################################################
########################################################
########################################################
########################################################
#############
done
Bytes transferred = 2397630 (2495be hex)
Erasing
sector .........................................................................................................................................................................................
....................................................................................................................................................................................................
....................................................................................................................................................................................................
...............................................................done
Erased 640 sectors
Copy to Flash... .done
Un-Protected 1 sectors
Erasing Flash...Erasing sector .done
Erased 1 sectors
Writing to Flash... .done
Cautions :
In this process, it will takes about 4 minutes.
please, don't power off .
Protected 1 sectors
U-Boot>
Now restoration has been ended.
U-Boot> boot
"boot" command make this system boot.
Once it has been recovered, login screen is displayed. Now type in ID and password as you would access to
telnet.
Then register deleted Mac address. Input command for Mac address is “ def mac xx:xx:xx:xx:xx:xx”
It can be saved by “ def save” command. Reboot after saving
Mac address is printed at the label attached on top of the product.
The following shows example of Mac address “ 00:01:02:03:04:05” .
16