Soul Electronics SL100 User Manual
Page 11
Disconnecting Your Soul® Headphones
Once you have finished using your Soul® in-ear headphones, disconnect from your device. Firmly hold your music or phone device. Pull the plug from the
device by holding the plug. Store your headphones in the protective case to keep safe and clean. Always store the headphones in the case to prevent
damage when not in use.
Caution
Do not try to unplug the headphones by pulling on the cables as it may cause damage.
Trouble Shooting Guide
Problem
Solution
No Sound
Check plug; make sure it is plugged in all the way.
Check volume level, increase volume if necessary.
Check power, make sure device is on.
Check in-line controller, press center button to ensure it is not on Pause.
Low Volume Level
Make sure that the headphones are creating a proper seal around your ears.
Increase the volume level on your device.
Only One Side Has Volume
Make sure that the plug has been inserted all the way into your device headphone jack.
Check the connection to the headphone input jack. Make sure the plug has been inserted all the way.
Product Registration Website: www.soulelectronics.com
Note: You must register your product for warranty
Customer Support: www.soulelectronics.com
9