Soundmatters FOXL - Manual (Page 7)

6
BEFORE you begin this procedure be sure your
phone (or other A2DP Bluetooth device) is able to
play/stream music as you have only a few minutes to
execute the pairing.
To pair with compatible A2DP device:
1) Switch foxL ON.
2) Push and hold front button, you will hear a “pop”
3) Keep holding, in 3 seconds, and will hear a “boop”,
then a rapid “Boop, Boop”
4) Release button; the button LED flashes amber/green
5) Bluetooth will search the last five previously paired
units (for up to 30 seconds).
6) If Bluetooth can’t discover prior paired units, it will
search for new units to pair with.
7) If Bluetooth can’t pair successful (about 2 and half
minutes), it will auto turn off.
8) Repeat from step 2 if you need to pair again.
9) After the completing initial setup, foxL will
automatically find its paired partner with no wait.
Bluetooth button
Bluetooth Setup
(Bluetooth-equipped models)
Follow your device’s instructions for
Bluetooth Pairing. (Each is different!) Initial
pairing code is 0000.
Some take just seconds to pair, and some
are less friendly and can take longer.
If given an option in the transmitter setup,
select “headphone,” NOT “headset.”
Visit www.soundmatters.com for more
info and a list of compatible Bluetooth
devices.