Speeco S401635BB User Manual
Page 9
ASSEMBLY INSTRUCTIONS
STEP 1: Remove all the components from the shipping container. Inspect each piece for shipping damage. If any part is
damaged, contact your dealer or delivering carrier.
STEP 2: Attach the two wheels (1) to the tank assembly wheel spindles using the 3/4” light flat washers (2) ,3/4” NF
slotted nuts (3), 1/8” x 1-1/2” cotter pins (4) and the hub caps (5). These items are in the hardware package.
Tighten the slotted nuts and make sure the wheels rotate freely.
Page 7
ITEM NO.
DECSRIPTION
QTY.
1
Beam Assembly
1
2
Beam Lock Assembly 1
3
Tank Assembly
1
4
Tire and Wheel Assembly 2
5
Tongue Assembly
1
6
Fender
2
NOTE: This log splitter was partially assembled at the factory. Refer to the drawings and parts list should it become
necessary to disassemble the unit for repair or replacement of parts
ITEM NO.
DESCRIPTION
QTY.
1
Tire and Wheel
2
2
3/4” Light Flat Washer
2
3
3/4” Slotted Nut
2
4
1/8” x 1-1/2” Cotter Pin
2
5 Hub
Cap
2