Speeco S24045000 - Manual (Page 11)

Page 9
ILLUSTRATION C
NOTE: It is important to replace the self-sharpening point on the auger when it shows signs of excessive wear.
Generally, the digging life of the point will be greater than that of the inner cutting edge. The digging life of
the inner cutting edge will be greater than that of the outer cutting edge since it covers fewer inches of
digging circumference.
CUTTING EDGES AND POINT PARTS BREAKDOWN
REFERENCE NUMBER SKU DESCRIPTION NUMBER REQUIRED
1 S24056700 6 in. cutting edge 2
2A S24057700 9 in. outer cutting edge 1
2B S24057800 9 in. inner cutting edge 1
3 S24058700 12 in outer cutting edge 1
4 S24058800 12 in. inner cutting edge 1
5 S24059200 Screw point with 1-1/4 in. NC threads 1
6 O/L 3/8 in. NC x 1-1/4 carriage bolt 4
7 O/L 3/8 in. lockwasher 4
8 O/L 3/8 in. NC hex nut 4
O/L - Obtain locally. Common fasteners available through hardware and farm stores.