Speeco 24044000 - Manual (Page 6)

REPAIR AND MAINTENANCE SAFETY
OPERATING SAFETY
ALWAYS operate this post hole digger from the tractor seat.Only one person should operate the digger.
NEVER attach the post hole digger with the tractor engine running.
NEVER operate the post hole digger with anyone near or in contact with any part of the implement, PTO driveline or auger.
Serious injury or death could result from entanglement with moving parts.
ALWAYS make sure that the tractor brake is set before digging a hole.
ALWAYS keep hands, feet and clothing away from power-driven parts during operation.
NEVER manually position the auger or manually force the auger into the ground.
ALWAYS make sure that the tractor engine is shut off and the PTO drive is disengaged before leaving the tractor seat.
NEVER move the tractor with the power-take-off in the ON position.
NEVER exceed 540 RPM PTO operating speed.
NEVER operate the post hole digger when the auger point is more than 6 in. above ground level. Operating the digger in
elevated positions may cause the PTO driveline “U” joints to bind resulting in equipment damage and operator injury.
ALWAYS turn off the digger immediately if an immovable object is encountered to prevent damage to the gear box or
driveshaft and possible injury. A shear bolt is provided but may become welded to the input shaft if the driveshaft is left
running after being sheared.
.
TRANSPORTATION SAFETY
NEVER allow anyone to ride on Implement.
Make certain the slow moving (SMV) sign and other reflectors are clearly visible. Follow local traffic codes for slow moving
vehicles when transpotting on public roads.
ALWAYS perform maintenance operations such as lubrication, adjustments or repairs on the post hole digger with the
tractor engine off, the PTO drive disengaged and the auger point resting on the ground.
ALWAYS use the correct shear bolt (Grade 5). NEVER use or replace the shear bolt with one that is longer than the one
specified in the manual (5/16” x 2-1/2”).
Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose
fasteners, worn or broken parts, and leaky or loose fittings. Serious injury may occur from not maintaining this machine in
good working order.
Do not modify or alter this Implement. Do not permit another to modify or alter this Implement, any of its
components or any Implement function. Any modification will void the warranty.
Page 4