Working with extender probe – StarTech.com IREXT2 User Manual
Page 5
Instruction Manual
2
4. If using the included probe(s) situate the IR Extender Probe near the IR sensor
receiving window of the device you wish to control. The probe should be within
0.5m and at angles +/- 15°.
Working with extender probe
5. Insert the metal connector provided by the probe, into the IR Extender port
located on the back of the Receiver unit.
6. Extend the antenna on the receiver unit and position it vertically.
7. Situate the unit labeled “Transmitter”, near the location from which you wish
to initiate control, ensuring that an available power outlet is easily accessible.
8. Connect the remaining AC power adapter to an available power outlet, then
to the DC jack on the back of the IREXT2 transmitter unit.
9. Extend the antenna on the transmitter unit and position it vertically.
10. The Infrared Extender is now ready for use.