StarTech.com DSRXL - Manual (Page 9)

Instruction Manual
6
Main
• TCP/IP Settings:• configure the TCP/IP settings such as Host Name, Domain Name, IP
address, TCP port, network mask, Gateway, DNS, etc.. DHCP mode can also be enabled.
• Date and Time:• Set the current date and time. You can sync the Broadcaster’s time
with the computer time and specify two NTP time servers to synchronize with.
• Rescan Network (F5):• Redetects all hardware on the network.
• Update Receivers and Splitters:• Update the firmware on the Receivers using the
resident software/firmware on the Broadcaster.
• Default Network Tree:• Clears all the monitor listings and resets all of the labels to
their default values, then proceeds to do a network rescan.
• Redraw Network Tree (F6):• Refresh the main window view.
Log
• Log (F7):• Will record the client access IP and also the important system messages
and error messages.
Groups
• New Group:• Sets up a new Group of Monitors. To join monitors to a group, you
need first checkmark them in the main window.
• List of Groups:• Gives a listing of all Groups available.
• Send Command to Checked Monitors:• Send commands such as Video ON/OFF,
Audio ON/OFF and also the audio volume adjustment command to the Monitor
itself via RS-232 interface. Also you can set the serial connection parameters on the
Receiver side.
Users
• New User:• Set up a new user account.
• Edit User:• Edit a user account.