StarTech.com SP123DP - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 10/27/2011
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1 x DisplayPort Multi Monitor Adapter
• 1 x Power Adapter
• 1 x Instruction Manual
System Requirements
• DisplayPort enabled computer system/video card
• DisplayPort enabled monitor/display device
• Available AC electrical outlet
• DisplayPort cables (male/male)
SP123DP
Triple Head DisplayPort Multi Monitor Adapter
*actual product may vary from photos
Installation
1. Make sure the computer system and monitors/display devices are powered off.
2. Using a standard DisplayPort cable, connect the Multi-Monitor Adapter to the DisplayPort connector on the Host computer system.
3. Connect the DisplayPort monitor/display device(s) into the numbered connectors on the Multi-Monitor Adapter. Make sure to connect
the monitor/display device(s) in order from 1 to 3 (do not skip ports).
4. Connect the included power adapter to the Multi-Monitor Adapter.
5. Power on the monitor/display device(s).
6. Turn on the Host computer system.
7. The operating system will automatically detect the Multi-Monitor Adapter and either clone/mirror a single image on all displays, or span
an image across all displays.
8. To change the display setting/mode, change the display resolution via the operating system’s display properties. To use Clone Mode, set
the display resolution to equal or less than the maximum resolution of the smallest connected display. Set the display resolution higher,
to use Span Mode.
The SP123DP Triple Head (DisplayPort) Graphics Expansion Module
is an external multi-monitor spanner/splitter that lets you add up
to 3 displays to a desktop or laptop PC, from a single DisplayPort
output.
Output a single-mode DisplayPort signal to span across 3 monitors
as a single panoramic display at resolutions up to 3840x1200 or
clone (mirror) your primary display, using this device as a 3-port
DisplayPort video splitter.
Front View
Rear View
DisplayPort
connector (input)
DC Power connector DisplayPort connector (output)