StarTech.com ST122LE - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 05/18/2012
For the most up-to-date information, please visit: www.startech.com
ST122LE
2 Port VGA Video Splitter - 300MHz
*actual product may vary from photos
Packaging Contents
• 1 x ST122LE video splitter
• 1 x USB to DC Power adapter cable
• 1 x Installation Guide
System Requirements
• VGA enabled video source device (i.e. computer, laptop, etc) with
an available USB port
• VGA enabled display devices (i.e. monitor, projector, TV, etc)
Installation
NOTE: Before connecting the splitter to the source computer and
displays, you should ensure that the workspace is configured to
require minimal cable between the computer and splitter, and
between the splitter and the displays.
The maximum resolution you will be able to use for your application
depends on cable quality and length, and how many interference-
causing devices are nearby. You may not be able to use the
maximum resolution at longer distances. For the best possible
performance, keep the length of cable from the source computer to
the splitter to 6 feet (1.8m).
1. Power down the host computer and displays that will be connected.
2. Connect the Video In connector on the splitter to the Video Out
port on the host computer.
3. Using a high-quality HD-15 VGA switchbox male-to-male cable
(StarTech.com part number MXT101MMHQ), connect one end of
the cable to one of the Video Out ports on the splitter. Connect
the opposite end to the VGA input on the display. Repeat this
process for the remaining display.
4. Connect the tip on the power adapter (provided) to the power
port on the video splitter. Connect the remaining end to an
available USB port on the host computer.
Once you have completed the steps above, you can power on the
displays and the host computer. Each will now display the image
from the source computer.
Specifications
Video Signal VGA (RGBHV)
Number of Ports 2
Connectors
2x DE-15 VGA female
1x DE-15 VGA male
1x USB type A male
LEDs 1x Power
Maximum Video Resolution 2048 x 1536
Video Bandwidth 300MHz
Maximum Cable Distance 65m / 210ft
DDC Support DDC, DDC2, DDC2B (Port 1 only)
Integrated Cable Length 400mm
Operating Temperature 0°C ~ 70°C (32°F ~ 158°F)
Storage Temperature -20°C ~ 85°C (-4°F ~ 185°F)
Humidity 0% ~ 95% RH
Dimensions 68.0mm x 46.0mm x 21.5mm
Weight 110 g