StarTech.com VS221VGA2HD - Manual (Page 7)

Instruction Manual
3
Hardware Installation
Mode Selection and Switch Operation
1. Using an HDMI cable (not included), connect your HDMI-enabled video source
device to the HDMI audio/video input port #1 on the VS221VGA2HD.
2. Using a VGA cable (not included), connect your VGA-enabled video source device to
the VGA audio/video input port #2 on the VS221VGA2HD.
3. (Optional) If your VGA-enabled video source device includes an audio output,
connect the audio source output on the device to the 3.5mm audio input port #2 on
the VS221VGA2HD using a 3.5mm audio cable (not included).
4. Using an HDMI cable (not included), connect your HDMI-enabled display device to
the VS221VGA2HD.
5. Using the included power adapter, connect the power adapter port on the
VS221VGA2HD to an available power outlet.
6. Turn on the HDMI-enabled display device as well as any connected HDMI &
VGA-enabled video source devices.
Change the mode selection switch to choose your desired operation mode.
Instructions and descriptions for each operation mode are listed below:
Manual Mode
Manual mode enables you to switch between video sources with push button
operation.
1. Set the mode selection switch to “Manual Switch” to place the VS221VGA2HD into
manual mode.
2. Press the Input Selection Button to toggle between each video source device.
The active port LED indicator will light as video sources are switched, indicating
which port is selected.