StarTech.com RACKCONS2001 - Manual (Page 7)

Instruction Manual
4
8. Installation is now complete.
How to Use
Connecting the Console
To connect the LCD console to a computer, perform the following steps:
1. Turn off your computer.
2. Connect the VGA or DVI video cable from the VGA/DVI output on the computer
system to the VGA or DVI port on the rear of the rack console. Only connect one or
the other, not both.
3. Set the USB-PS/2 switch on the console to either USB or PS/2 mode, depending on
which you wish to use to connect the computer.
4. Connect either the USB or PS/2 connector on the rear of the rack console to a USB or
PS/2 port on the computer system.
5. For audio, connect a 3.5mm audio cable to the Line In connector on the console
to the Line Out on the computer or external KVM (available separately, such as
StarTech.com ID: SV831DUSBAU).
6. Connect the power adapter and power cord to the power connector on the console.
Connect the remaining end of the power cord to an available power outlet.
Note: The front USB port on this console is a USB 1.1 port for connecting an external
keyboard / mouse only. It is not meant for high-speed data transfer.
DVI
connector
USB
connector
PS/2
connector
VGA
connector
3.5mm
mini-jack
Audio In Power
connector
USB-PS/2
switch