StarTech.com DP2DVID - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 02/10/2012
For the most up-to-date information, please visit: www.startech.com
DP2DVID
DisplayPort to DVI Dual Link Active Converter – USB Powered
*actual product may vary from photos
Packaging Contents
• 1 x DP2DVID adapter
• 1 x Installation Guide
System Requirements
• DisplayPort enabled computer system/video card
• Available USB port
• DVI-D (digital) enabled display device (i.e. monitor,
projector, HDTV, etc)
Specifications
Connectors
1 x DisplayPort male
1 x USB type A male
1 x DVI-D female
Maximum Video Resolution
Support
2560x1600
Cable Length
USB: 18”
DisplayPort: 14.5”
Dimensions 105.5mm x 58.0mm x 22.0mm
Weight 175g
Installation
1. With the computer system powered off, plug the
DisplayPort connector from the DP2DVID adapter into
the computer’s video card.
2. Connect the USB connector from the DP2DVID
adapter into a USB port on the computer system.
3. Connect a DVI-D (digital) cable from the DP2DVID
adapter to your display.
NOTE: For 2560x1600 operation, a dual link DVI-D cable
must be used.
4. Power on the monitor followed by the computer
system.No software/driver installation is required.