StarTech.com SV5CONS - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 02/13/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x Remote User Station
• 1x Instruction Sheet
• 1x Power Adapter
SV5CONS
Remote User Station for Enterprise IP KVM Switch
*actual product may vary from photos
Installation
1. Connect the user station via CAT5 cable to the KVM-A port on the
rear panel of the SV5CONS. Please note that if the Remote User
Station is only being attached to one KVM switch, the KVM-A port
must be used (the KVM-B port will be inoperable).
2. Connect the remaining end of the CAT5 cable used in step 1 to
the RJ45 port marked USER-1 on the SVxx53DXI.
3. Connect a VGA compatible monitor to the VGA port on the front
panel of the SV5CONS.
4. Connect a USB keyboard and mouse device to each of the
available USB ports on the front panel of the SV5CONS.
5. Connect the Power Adapter to the power port on the rear panel
of the SV5CONS, then connect to an
available power outlet.
Rear panel
Front panel
<CTRL><CTRL><C> Cause auto calibration to restart
<CTRL><CTRL><A> Go to A port
<CTRL><CTRL><B> Go to B port
<CTRL> + <Space>
To switch A/B connections at any time
(even if no KVM OSD is shown, or if
current KVM is powered down).
The following commands can be executed on the local machine to
make the following changes: