StarTech.com 2636CABINET - Manual (Page 6)

Instruction Manual
3
Shelves
Determine the type of shelf to be installed, Sliding or Fixed.
Fixed
This type of shelf is secured to the front of the cabinet rails and does not move. For
short shelves simply screw the shelves into place to the front posts of the cabinet. For
deeper ones, determine the desired height that you want to install the shelf at. Slide
the nuts to the desired location so that they line up with the holes in the shelf and
fasten the shelf’s brackets with the provided screws to the front of the post.
Sliding
Determine the desired height that you want to install the shelf at. Slide the nuts to the
desired location so that they line up with the holes on the shelf’s mounting bracket.
You will want the slide rail apart in order to access the holes properly. To do this open
the rail and push the black lever up. Holding the level up, pull the two pieces of the rail
apart. Using the screws provided screw to the mounting brackets to the front and rear
posts. The front of the shelf’s brackets should be fit snugly against the front of the post.
Fixed Shelf Sliding Shelf