ClearOne comm PSR1212 - Manual (Page 27)

Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
CHAPTER 3: System
Configuration
G-Ware Requirements
ClearOne’s G-Ware software provides an easy interface for configuring and
controlling your PSR1212. While some configuration can be done using the front
panel LCD menus, G-Ware is required to complete the custom configuration of your
audio conferencing system. If you are using the default settings, no configuration is
necessary.
This chapter describes how to install G-Ware and create a site. It also
describes all configurable parameters of your system. These descriptions are
designed to be used as a guide as you make adjustments for your particular
installation. It is not necessary to configure all parameters.
ClearOne’s G-Ware software requires the following minimum system configuration:
• Minimum RAM requirement is determined by the operating system
Windows 95 OSR2 64MB
Windows 98 64MB
Windows ME 64MB
Windows NT 64MB
Windows 2000 128MB
Windows XP 256MB
• PII 200MHz (or AMD equal) or higher processor
• 8MB Video Card
• 1024x768 (16 bit) high color monitor
• Internet Explorer 4
• 20MB of free hard disk space
• RS-232 COM port
• CD-ROM drive