StarTech.com PDU02IPSC Manual - Manual (Page 15)

Instruction Manual
11
Http Port: Assign the desired HTTP port (default is port 80) for connecting to the PDU
via a web browser. If you change the HTTP port, enter the IP address followed by the
new HTTP port into your browser address bar (e.g. http://192.168.1.10:8080).
Save: Saves all changes.
Mail Server Tab
Configure the Mail Server settings to send notifications when an event has occurred.
SMTP Server Address: Enter the Hostname or IP address of the SMTP Mail Server that
will be used to send emails from the PDU. If entering a Hostname, you will also be
required to enter the DNS Address on the Network tab.
SMTP Port: Enter the port number for the SMTP server. The default port is 25.
Sender Mail Address: This must be a legitimate email address.
Mail Subject: Enter a subject line to easily identify the device.
SMTP Auth: Check this box if the Mail Server requires authentication to send emails.
SMTP Account: Enter the account name if SMTP authentication is required.
SMTP Password: Enter the password if SMTP authentication is required.
Mail Test: This is used to verify that the email works properly.
Save: Saves all changes.