Calibre UK VGA-10+ - Manual (Page 2)

All connectors are on rear of case.
Includes " Control" input and expansion
output for tutor control of Autoswitch based
classroom system. Turning the ControlSwitch
(available from Calibre) On/Off enables/disables
monitors connected via Calibre's AutoSwitch.
Multiple VGA-10+s can be interlinked for large
installations.
TECHNICAL SPECIFICATION
Video Input
RGB 0.7V 75R, Connector
15W HDD male.
Video Outputs
RGB 0.7V 75R, Connector
15W HDD female. Ten
amplified outputs. Amplified
signals have 1 HF cable
compensation control per 2
outputs. Bandwidth with cable
compensation flat 200MHz.
Sync
Separate or composite TTL
syncs, individually buffered.
VGA-10+ will also work with
sync on green. Output syncs
are in same format as input
syncs.
Power Requirements
220/240V AC, 50/60Hz. 110V version available
to order. Power consumption 30W max.
Approximate Size
19" Racking Case, 2U size, Front panel is 482 x
87.5 mm, case is 249mm deep excluding front
panel and connectors. Case is finished in black
epoxy paint.
Calibre UK Ltd
Cornwall House,
Cornwall Terrace,
Bradford, West Yorkshire
BD8 7JS, England
Tel +44 (0)1274 394125
Fax +44 (0)1274 730960
E-mail [email protected]
Web-site www.calibreuk.com
Issue 1.8 10 December 2007 E&OE Specifications subject to change without notice. All trademarks acknowledged.
10-Channel Computer Video Distribution Amplifier
REMOTE
DISPLAY
VGA-10+ VGA PC
UP TO
100m
INPUT
1m
APPLICATION OF THE VGA-10+
DISPLAY
REMOTE REMOTE
DISPLAY DISPLAY
REMOTE
DISPLAY
DISPLAY
REMOTE
REMOTE
MONITOR
PC'S