StarTech.com SATADOCK525 - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 02/23/2012
For the most up-to-date information, please visit: www.startech.com
SATADOCK525
5.25in Bay Mounted 2.5/3.5in SATA Hard Drive Docking Station
*actual product may vary from photos
Packaging Contents
• 1 x SATADOCK525 docking station
• 2 x SATA Data Cables
• 2 x SATA Power Adapter Cables
• 4 x Mounting Screws
• 1 x Installation Guide
Installation
1. Install the SATADOCK525 docking station into an available
5.25” external bay in your computer case. Follow the
directions for installing such a device per the computers
user manual. 4 mounting screws are provided for cases that
require it.
2. Once the docking station is securely mounted, connect the
SATA data and power cables. Both sets of connectors on the
rear of the docking station must be connected, for both hard
drive slots to work. An LP4 to SATA power cable is provided,
but if your computer power supply has an SATA power
connector, you can connect that directly to the docking station.