StarTech.com SATDOCKU2EU - Manual (Page 6)

Instruction Manual
3
Disk Installation
1. Connect the Dock to an available power outlet, using the provided power adapter.
2. Connect the Dock to the (powered) Host Computer, using the provided USB/eSATA
cables.
3. Insert the 2.5” or 3.5” SATA/SATA II drive(s) you wish to install, such that the SATA
power and data connectors at the back of the drive are properly aligned with the
corresponding connectors inside the Dock.
4. Switch the power switch to “ON” position.
Once the drive has been inserted, the operating system will detect that it has been
connected and automatically update the drivers for proper operation.
SATA Drive Removal
If you are using the SATADOCKU2 or SATADOCKU2E, you can remove SATA drives from
the docking station by gently pulling them out from the top of the dock.
When removing the installed drive from the Dock, please ensure that you have
followed the appropriate steps (dependant on the operating system) to disconnect
removable storage. In Windows for example, click on the Safe Remove icon located in
the taskbar. Select the drive from the menu provided, then click Stop. Select the device
to disconnect, and click OK.