StarTech.com MCM110ST2EU User Manual

Instruction manual, System requirements, Installation

Advertising
background image

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com

Manual Revision: 08/14/2012

For the most up-to-date information, please visit: www.startech.com

MCM110SC2 / MCM110SC2GB / MCM110SC2EU
MCM110ST2 / MCM110ST2GB / MCM110ST2EU

10/100 Ethernet to Multi Mode Fiber Media Converter SC/ST 2km

Packaging Contents

• Fiber/Ethernet media converter

• Power Adapter

• Instruction Manual

System Requirements

• 10/100Base-TX compatible Ethernet network

• 100Base-FX fiber network

• SC/ST multi-mode fiber cable

• Available AC electrical outlet

Installation

1. Connect the Ethernet cable to the Fiber Media Converter “LAN” port.

2. Connect the other end of the Ethernet cable to the router/switch/

computer NIC.

3. Connect the fiber cable into the fiber receptacle on the media converter.

4. Plug the provided power adapter into the media converter, and

into an available AC power outlet.

5. Connect the other end of the fiber cable into the router/switch/

computer NIC/another media converter. Remember to reverse

the TX and RX leads between the two devices.

DIP Switch Settings

Switch

Function

State

Status

SW1

UTP Mode

Auto

Auto UTP detection

Manual Use manual UTP settings

SW2*

UTP Speed

100

100Mbps link speed

10

10Mbps link speed

SW3*

UTP Duplex

Full

Full duplex

Half

Half duplex

SW4

Link Fault Pass-

through

LFP

LFP mode off

ON

LFP mode on

*not enabled when SW1 set to ‘Auto’

LED Indicators

LED

Function

State

Status

PWR

Power

Indicator

ON

Converter has power

OFF

Converter has no

power

FX Link/Act

Fiber Link/

Activity

ON

Fiber link OK

OFF

No link detected

Flashing

Receiving data

FEF

Far End Fault

ON

Far end link failure

OFF

No failure detected

100

Mode

ON

100Mbps

OFF

10Mbps

Full

Duplex Mode

ON

Full duplex mode

OFF

Half duplex mode

TX Link/Act Ethernet Link/

Activity

ON

Ethernet link

detected

OFF

No link detected

Flashing

Receiving data

*actual product may vary from photos

DIP Switches

LED Indicators

RJ45 Ethernet

Connector

ST Fiber

Connectors

DIP Switches

LED Indicators

RJ45 Ethernet

Connector

SC Fiber

Connectors

Advertising
This manual is related to the following products: