StarTech.com USB2SLSATINT - Manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 01/19/2012
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• USB2SLSATINT adapter
• 2 x Mounting screws
• Installation Guide
System Requirements
• Slimline SATA optical drive
• SP4 power connector on power supply
• USB enabled computer system with available connector
• USB enabled operating system
USB2SLSATINT
Internal USB 2.0 to Slimline CD/DVD Optical SATA Adapter
*actual product may vary from photos
Specifications
Bus Interface USB 2.0
Chipset ID Jmicron JM20329
Connectors
1 x Slimline SATA
1 x SP4 floppy power
1 x 5-pin USB header
Maximum Data Transfer Rate USB 2.0: 480Mbps
Operating Temperature -10°C ~ 50°C (14°F ~ 122°F)
Storage Temperature -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 0 ~ 75% RH
Dimensions (LxWxH)
102.28mm x 25.0mm x
12.14mm
Weight 25g
Installation
1. Connect the Slimline SATA connector on the USB2SLSATINT
adapter to the connector on the Slimline SATA optical drive.
2. Fasten the adapter board to the optical drive using the two
included mounting screws.
3. Mount the assembled optical drive into the computer system. If
the system does not have a slim optical drive bay, a mounting
bracket may be necessary (i.e. StarTech.com ID: SLIMCDFDCAGE
for 5.25” bays).
4. Connect a 5-pin USB header cable (not included) from the adapter
board to an available USB connector/header on the computer
system, using an appropriate cable or adapter (i.e. StarTech.com
ID: USBINT5PIN).
5. Connect an SP4 floppy power connector from the system power
supply to the SP4 connector on the adapter.