StarTech.com PEX4S950 - Manual (Page 6)

Instruction Manual
3
4. Select Include this location in the search, then click on Browse to specify the exact
file location (E:\IO\OXFORD\NT4 etc.) and click Next to continue. Please note that
if the exact file is not selected, an installation conflict could occur. Please pay
particular attention to the folder name, when browsing to the destination file.
5. Click Next to continue and click Finish to complete the installation.
6. Right-click on the My Computer icon, and select Manage. Choose Device Manager
(in the left pane), and double-click on Ports (in the right pane).
7. Right-click on one of the newly added ports, and choose Properties. Click on the
Data rate tab, then click on Detect Crystal Frequency. Click OK to save this setting.
8. You will be required to complete steps 1-7 multiple times in order to install all
necessary components. Please do so. Once complete, a message balloon will appear
in the taskbar (normally the bottom right corner of the screen), indicating that
installation is complete:
9. To confirm that all of the necessary components have successfully been installed
browse to the Device Manager. To perform this step, right-click on My Computer
and select Manage. In the left pane of the Computer Management window that
appears, click on Device Manager. In the right pane, you should see the following:
10. Installation is now complete. You can now connect serial devices as desired, to the
ports provided by the card.
OX16PCI954 PCI UARTS
and bridge
PCI Communications Port
(x4)