Capresso Impressa S7 - Manual (Page 19)

• To begin programming, open cover, press and hold the
P button until you hear a "beep."
The display will always show the first function:
POWDER QUANTITY / PRESS KEY .
You are now in programming mode.
15.1 PROGRAMMING POWDER QUANTITY
COFFEE READY
• Press the P button.
POWDER QUANTITY / PRESS KEY
• Press the coffee button you want to program (Fig. 2; button
C,D or E).
POWDER
–_ _ _ ll_ _ _+
• Push the + or - button to increase or decrease the ground
coffee quantity. The vertical bars in the display will move
accordingly. This will make your coffee stronger or milder.
• To store this new setting in memory press the P button.
POWDER QUANTITY / PRESS KEY
You can now change the setting for another coffee button. Just
press that coffee button and repeat above procedure.
IMPORTANT: The "2-cup" buttons are adjusted automatically.
• Press the N button to return to
COFFEE READY or press the
+ button to go to the next function.
15.2 PROGRAMMING COFFEE TEMPERATURE
COFFEE READY
• Press the P button.
POWDER QUANTITY / PRESS KEY
• Press the + button until the display shows
TEMP. COFFEE / PRESS KEY
All coffee buttons are set to temperature HIGH . The other
setting is NORMAL and will reduce the coffee temperature by
about 7º F.
• Press the coffee button that you want to program (Fig.2;
button C,D,E): TEMP. HIGH
• Push the + button. The display changes to TEMP. NORMAL .
• To store this new setting in memory press the P button.
TEMP. COFFEE / SELECT KEY
• Press the N button to return to COFFEE READY or press the
+ button to go to the next function.
15.3 PROGRAMMING CUP SIZE ( WATER QUANTITY )
You can program any of the three "single-cup" buttons to
produce between
1 ⁄
2
oz. and 8 oz. of coffee. The "double-cup"
buttons will automatically produce twice that amount. See
chapter 6 for the factory-set cup sizes.
• Make sure you have coffee beans in the bean container.
COFFEE READY
• Press the P button.
POWDER QUANTITY / PRESS KEY
• Press the + button until the display shows
WATER QUANTITY / PRESS KEY
• Place a cup under the coffee spout (Fig. 8a or 8b) and press
the coffee button you want to program (Fig.2,C,D,E),
e.g. 1-small-cup-button.
The machine starts grinding and the display shows:
1 SMALL CUP / PLEASE WAIT
19.