Studio Electronics Fox - Manual (Page 9)

9
In hopes that you might keep the visuals of your treasured analog Fox in tip
top shape, follow these general rules when cleaning your Fox:
• Turn the power OFF and unplug the unit
• Gently wipe with a clean lint-free soft cloth
• If necessary, slightly dampen the cloth using lukewarm distilled water
(making sure not to over saturate as liquid could drip inside the unit
and cause damage)
• Use a dry lint-free soft cloth to remove any remaining moisture
• Do not use aerosol sprays, solvents, or abrasives
Damage Requiring Service: Do not attempt to service your FOX. The unit
should be serviced by qualified service technicians when:
• The AC power supply cord or the plug has been damaged
• Objects have fallen or liquid has been spilled into the unit
• The unit has been dropped, or the enclosure damaged
• The unit does not operate normally or exhibits a marked change in
performance.
Other Precautions: Protect your FOX from strong jolts and vibration.
Never apply strong pressure to the front, back or sides, or strike your
FOX in any manner whatsoever. A stern scolding of your Fox,
however, is certainly permissible and quite cathartic.
This product, either alone or in combination with an amplifier and
headphones or speakers, may be capable of producing sound levels that
could cause permanent hearing loss. Do not operate for a long period of
time at high volume levels or at a level that is uncomfortable.