Studio Electronics Boomstar Modular - Manual (Page 18)

AMP Module - 2
All Controls and Patch Points
INPUT – Adjusts the audio input.
ST1 CV2 (formerly STAGE 1/2) – Adjusts stage 1, control voltage 2 (CV).
ST2 CV2 (formerly STAGE 2/2) – Adjusts stage 2, control voltage 2 (CV).
DRONE – Sustains the last note received—“Hold that Train.”
DRIVE – Final output stage saturation/overdrive—absolutely smash the input, and back down the output level for classic guitar amp
“master volume” crunch savagery, and last gasp volume control if so inspired.
OUTPUT – Adjusts the audio output.
INPUT – Audio input.
ST1 CV1 (formerly ST 1/1) – Stage 1, control voltage 1 input (CV).
ST1 CV2 (formerly ST 1/2) – Stage 1, control voltage 2 input (CV).
ST2 CV1 (formerly ST 2/1) – Stage 2, control voltage 1 input (CV).
ST2 CV2 (formerly ST 2/2) – Stage 2, control voltage 2input (CV).
OUTPUT – Audio output.
!
15