Studiologic Sledge 2.0 Quick Guide - Manual (Page 4)

SLEDGE 2.00
4
SAMPLES: Sledge 2.0 is able to load and play Samples on OSC 1, in addition and
alternative to play all other WAVEFORMS and WAVETABLES
To select the Samples, press the WAVEFORM button several times in order to choose
the desired sound, that will be activated in the following sequence:
SAWTOOTH>SQUARE>TRIANGLE>SINUS>PULSE>WAVETABLE>SAMPLES
When Samples are selected, both PULSE and WAVETABLES led will be on, showing
that the Samples (if loaded) are activated and can be chosen in sequence by rotating
the encoder.
When WAVETATLE or SAMPLES are selected, the rotating encoder labeled WAVETABLE
will show the WAVETABLE or SAMPLE name as the example below, allowing to use
the sounds as any other standard WAVEFORM, adding OSC2, OSC2 and NOISE
generator, FILTER and AMPLIFIER ENVELOPE CONTROLS, MIXER AND EFFECTS.
WAVETABLE selection
SAMPLES selection