Studiologic VMK161Organ - Manual (Page 8)

KEYBOARD LAYOUT: DETAILS
Back Panel
The back panel contains the connective parts of the keyboard: Dual Midi outputs and 3 independent foot control-
ler inputs. The pedal inputs can accept sustain or volume pedals, each capable of sending out a completely diffe-
rent controller message. Pedal inputs can be programmed to accept almost any variety of manufacturers foot
pedals regardless of polarity. The power adapter input and power switch are also located in the rear panel.
Transport-Live Edit Controls
Transport and Live Edit controls are centrally located for quick access at a gig or in the studio. Simple but power-
ful, the Transport can easily be programmed to control a sequencer or a drum machine. Live Edit is indispensable
for a quick program change, bank select or Midi channel change.
Sliders
Sliders are perhaps the most desirable controls in a studio setting. Each of the 9 sliders may be programmed inde-
pendently. They can send command specific messages, like volume, to a sound module. Or they can send control
messages that may be routed through a sequencer to control various functions of the program you are running.
See your program manual for details. 4 banks in total x 9 sliders gives you 36 slider commands per patch. Note:
Drawbar is also a Bank.
I n s t r u c t i o n m a n u a l VMK-149plus/VMK-188plus
6
l a y o u t k e y b o a r d
live edit controls transport
PEDAL IN MIDI OUT 9V POWER
1 2 3
Adapter In
Power Switch