Features information and instructions – SunBriteTV 3230HD User Manual

Page 35

Advertising
background image

SunBriteTV Model 3230HD Operator’s Manual

Page 35

When programming a DirectTV, local cable universal remote control or Control system, you may find that SunBriteTV may not be on the

list of TV manufacturers. If that is the case, Model 3230HD supports SONY’s universal remote code.

Programming Other manufacturers’ Universal remote Control Devices

internal Thermostatically-Controlled Heater

The Internal Thermostatically-Controlled Heater keeps the unit warm in freezing temperatures and activates automatically when the

SunBriteTV internal temperature sensor reads a temperature inside the unit of 32

O

F. or lower. The heater remains on until the internal

temperature rises to at least 42

O

F. The heater provides a 20

O

F. temperature rise, allowing the TV to safely remain in temperatures as low

as -24

O

F. The ventilation fans are not activated when the heater is running and will automatically activate when required.

If temperatures below -24

O

F. are expected, we recommend that you bring your SunBriteTV inside to prevent damage to the LCD screen.

WARNING: In order for the automatic heater to work properly, and to prevent damage to the TV, your SunBriteTV must have

power applied at all times (power cord must be connected to the GFCI protected AC outlet).

sunBriteTV Pixel Quality Policy

SunBriteTV’s Pixel Quality Policy

(Applicable to LCD TVs sold within USA and Canada only.)

SunBriteTV

TM

LCD screens are manufactured with rigorous standards to maintain optimal viewing. However, the LCD screen may

have minor defects that appear as a small bright or dark pixel. This is common to all LCD screens used in display and television

products, and is not specific to SunBriteTV.
Bright dots are dots that appear bright and unchanged in size when a LCD TV screen displays a black pattern.
Dark dots are dots that appear dark and unchanged in size when a LCD TV screen displays a pure red, green, or blue pattern.
Adjacent dots are pixels located directly next to each other.

Your SunBriteTV will be replaced under warranty if it meets one of the following criteria:
—A total of 7 defective pixels, including both bright dots and dark dots are present. (Model 3230HD LCD TV screen has over a million

pixels.)
—2 or more pairs of adjacent bright dots are present.
—3 adjacent bright dots are present.
—3 adjacent dark dots are present.
To locate defective pixels, the LCD panel should be examined under normal operating conditions, in its native display resolution,

with a 90 degree viewing angle, from a distance of a approximately 20 inches.
To qualify for replacement, a defective LCD screen must be reported to SunBriteTV within 14 days from the day the customer

receives the TV.
For questions, please call our toll-free service number at 866.357.8688.

Features Information and Instructions

Advertising