SunBriteTV 5510HD - Manual (Page 25)

SunBriteTV Model 5510HD Operator’s Manual Page 25
Adjusting On-Screen Displays – Setup Menu
Setup Menu
1. Press  buttons to move the cursor to the item to be selected.
2. Press   buttons to make the desired adjustments.
3. When you are satisfi ed with your adjustments, press MENU or EXIT
to exit the main menu.
Menu language
Press
 buttons to Menu Language, then use 
 buttons to select menu language, the options are
English / French / Spanish.
Transparency
Press
 buttons to Transparency, then use  
buttons to select Transparency ON or OFF.
Zoom Mode
Press
 buttons to Zoom Mode, then use  
buttons to select current zoom mode, the options are
Normal / Wide / Zoom / Cinema.
Noise Reduction
Press
 buttons to Noise Reduction, then use  
buttons to select current noise reduction level, the
options are off / Weak / Middle / Strong.
Advanced
Press
 buttons to Advanced, then press  button
to enter the Advanced Sub Menu shown below
Note: This item is only available in VGA source input.
H-Pos
Press
 buttons and then use   adjust the
horizontal position of the picture (this function
is to adjust the picture to Left/Right as to your
preference).
V-Pos
Press
 buttons and then use   adjust
the vertical position of the picture (to adjust the
picture to Left/Right as to your preference).
Clock
Press
 buttons and then use   to adjust
the clock of the picture. (This function is to
minimize any vertical bars or stripes visible on
the background screen. The horizontal screen
size will also change.
Phase
Press
 buttons and then use   to adjust
the phase of the picture. (This function allows
you to remove any horizontal noise and to
sharpen the image of characters).
Auto
Press
 buttons and then press OK button
to perform the Auto Adjust function that
automatically adjusts the available options for
the best viewing confi guration.
Advanced Sub Menu
Setup Menu