Features information and instructions – SunBriteTV SB-5515HD User Manual
Page 33
SunBriteTV Model SB-5515HD Operator’s Manual
Page 33
When programming a DirectTV, local cable universal remote control or Control system, you may find that SunBriteTV is not on the list of
TV manufacturers. If that is the case, this model supports SONY’s universal remote code.
Programming Other Manufacturers’ Universal Remote Control Devices
Extreme Climate Warning
The Internal Thermostatically-Controlled Heater keeps the unit warm in freezing temperatures and activates automatically when the
SunBriteTV internal temperature sensor reads a temperature inside the unit of 32
O
F. or lower. The heater remains on until the internal
temperature rises to at least 42
O
F. The heater provides a 20
O
F. temperature rise, allowing the TV to safely remain in temperatures as low
as -24
O
F. The ventilation fans are not activated when the heater is running and will automatically activate when required.
If temperatures below -24
O
F. are expected, we recommend that you bring your SunBriteTV inside to prevent damage to the LED screen.
Note: In order for the automatic heater to work properly, your SunBriteTV must have power applied at all times.
SunBriteTV Pixel Quality Policy
SunBriteTV’s Pixel Quality Policy
(Applicable to LED TVs sold within USA and Canada only.)
SunBriteTV LED screens are manufactured with rigorous standards to maintain optimal viewing. However, the LED screen may
have minor defects that appear as a small bright or dark pixel. This is common to all LED screens used in display and television
products, and is not specific to SunBriteTV.
Bright dots are dots that appear bright and unchanged in size when a LED TV screen displays a black pattern.
Dark dots are dots that appear dark and unchanged in size when a LED TV screen displays a pure red, green, or blue pattern.
Adjacent dots are pixels located directly next to each other.
Your SunBriteTV will be replaced under warranty if it meets one of the following criteria:
—A total of 7 defective pixels, including both bright dots and dark dots are present. (The LED TV screen on this TV has over a million
pixels.)
—2 or more pairs of adjacent bright dots are present.
—3 adjacent bright dots are present.
—3 adjacent dark dots are present.
To locate defective pixels, the LED panel should be examined under normal operating conditions, in its native display resolution,
with a 90 degree viewing angle, from a distance of a approximately 20 inches.
To qualify for replacement, a defective LED screen must be reported to SunBriteTV within 60 days from the day the customer
receives the TV.
For questions, please call our toll-free service number at 800.331.4626.
Features Information and Instructions