Superlux SP108 - Manual (Page 2)

www.superlux.com.tw
Mixer Panel
A
F G
H
I
B C D E
A. Speaker Out
Connect to the speakers by using the
included cables.
B. RCA Output Jacks
These jacks are for a recorder.
C. Monitor Out
This control will determine the level of 1/4
line output jacks to be sent to powered
speakers for monitoring.
D. Mic/Line Inputs and Switches
These jacks accept your microphones
and instruments , and set the level switch
accordingly.
E. Stereo Line In Channels
The RCA jacks are for connecting to your
CD or MP3 player, while the 1/4 phone
jacks accept a stereo keyboard, synthesizer,
sampler, tone generator, external effect
processor or any other line level audio
equipment.
F. Level Meter
Five-stage level meter LEDs plus a
convenient Limiter LED to show when the
signal is triggering the Limiter circuit
Speech/ Music Switches
Set to Music when you are playing music
for getting enhanced bass or set to Speech
when making announcements.
Volume Master
This determine the output level of the entire
mix
G. Reverb Send, On/Off Switches
You may send the built-in reverb to channel
1 to 4 by the switches and the reverb
volume control.
H. Two-band EQ
This will give +/- 15dB boost or cut at high
and low band to compensate your input
signal.
I. Channel Volume
Independent level controls for every input
channel to set appropriate mixing level.
J. LOCK/OPEN
Originally, the mixer is installed in the
speaker compartment. But you can use a
screwdriver or coin to turn each screw on
the mixer from LOCK to OPEN until it clicks,
and securely hold the mixer's handles to
remove it from the speaker.
J