Superlux WH5 - Manual (Page 2)

Description
Professional microphone users tend to use different microphones
for different sound sources so that to achieve a desired sound
character. With Superlux WH5 microphone, a trilogy concept
microphone with 3 different capsules built-in so that the user can
select one of the capsule for the sound he preferred. Classical
appearance integrated with latest microphone technology for artist
demanding a unique "oldies" appearance with "goodies" music
performance.
A 3-position switch on the back to switch between percussion,
instrument, or vocal setting. On/off switch on the base for artist to
control the sound at his/her reach.
A 3-position switch on the back to
s w i t c h b e t w e e n p e r c u s s i o n ,
instrument, or vocal setting.
On/off switch on the base for
artist to control the sound at
his/her reach.
Drum
Vocal Instrument
l
l
l
l
l
l
l
l
3 different frequency response capsules in one body. Always a
sound meet your demand.
Typical application for percussion, instrument and vocal.
Classical appearance, latest technology.
On/off control, and 3-position capsule selection control.
Internal shock mount for reducing handling noise.
5/8" thread of standard microphone stands.
Tilt limit, and position set mechanism for 45 degree forward and
80 degree backward setting.
Chrome polish finish for long-term operation and collection.
Table stand --------------------------------------------------- HM6
Instrument boom stand --------------------------------------- MS104
Table stand included -------------------- --------------------- D1 -----
MS104
Instrument
boom stand
HM6
Table stand
D1
Table stand included
Features
Supplied accessories
Related accessories
Using a handheld microphone
For best signal to noise ratio, distance from the handheld microphone to the
sound source shall be as short as possible.
For higher gain before feedback and lowest background noise, the
microphone shall be pointed directly to the sound source. (refer to the
illustration below) The sensitivity of a super cardioid microphone is highest
on axis and lowest at 120 to 135 degrees.
To avoid interference between multiple microphones, each sound source
shall be picked-up by one microphone, use as less microphones as
possible in one space, or turn-on as less microphones as possible at the
same time.
To reduce crosstalk between microphones, an 1:3 guide line shall be follow:
The distance between microphone A to the sound source A is "1", the
distance between any other microphone to the sound source A shall be more
than 3 times.
When the (super) cardioid microphone get closer to the sound source, the
low frequency response is boosted, as so call "proximity effect". Experience
singer takes advantages of the proximity effect to improve the richness of
his/her voice or to increase the bass of the instrument as if an extremely
high quality equalizer is used. Same idea to reduce the bass by increase the
distance to reduce the bass when needed.
Reflecting surface affect sound as well. Beware of these surfaces such as
wall, table, or floor. Place the microphone away from the hard surfaces or
directly contact these surfaces to form a pressure zone microphone.
When using the microphone outdoor or in windy environment, additional
foam wind screen helps to reduce wind noise.
Keep grill pop screen clean to avoid degrading the sound quality. Do not
expose the microphone at high humidity/temperature environment to avoid
damage.
90
20-50mm
180
0
90
120 ~135
120 ~135
Monitor
Loudspeaker (s)
P.A. System
Loudspeaker
Recommended
Loudspeaker Locations
Maintainence
Condenser microphone shall be kept in low humidity environment for best
sound performance. Store the condenser microphones in airconditioned
room or dehumidifier to keep away form moisture. Clean air is another
important factor. Keep away from smoking environment to avoid tar
residuals.
GF
PRO
A
UDIO
Shanghai Shenzhen Taipei • •
T e l : 8 8 6 - 2 - 2 6 9 3 1 3 2 3
F a x : 8 8 6 - 2 - 2 6 9 4 8 9 9 0
E - m a i l : s a l e s @ s u p e r l u x . c o m . t w
H t t p : / / w w w . s u p e r l u x . c o m . t w
GOANG-FANN CO.,LTD.
3 F , N o . 7 , A l l e y 2 , L a n e 3 4 2 , F u - D e r 1 s t R o a d